Making Star Wars Props

Not sure why I’ve never mentioned it here, but for the past year, during the evenings and the weekends, I’ve been selling Star Wars props online. What began with working with sheet plastic and foam and cobbling together found objects to make various props has transitioned into learning 3D design, silicone molding, and resin casting. It’s required a ton of problem solving and learning new skills, but it’s also been the fulfillment of a dream that I’ve had for several years.

I don’t plan on overtaking this blog with prop designs that I’ve made, but it might happen. Until then, for those who are interested, you can get updates on my Facebook page.

 

Halloween 2015

Once again, my wife, kids, and I dressed up in new homemade Star Wars costumes that I created over the last few weeks. Like before, it was a ton of work and a ton of fun.

IMG_6708

From left to right: Ahsoka Tano (from the animated Clone Wars series), young Jedi, Rey (from upcoming Star Wars movie), another young Jedi, Sith Acolyte Eradicator (from a Star Wars video game that I’ve never played), and Luke Skywalker

IMG_6719

IMG_6714

Dang, my costume looks tough! Fierce, even.

IMG_6704

And a huge dose of adorable cuteness.

For photos of our last family-wide Star Wars costume fun, go here.

For photos of my Sith Acolyte costume build, go here.

Sith Acolyte Eradicator Costume

IMG_5897

IMG_5890

IMG_5878

For several years, since I first started working on my Boba Fett costume, I’ve thought it would be fun to build a costume that would be worthy of joining the 501st. If you’re not familiar with the 501st, it’s a international volunteer Star Wars costuming organization. It’s the organization that provides characters to zoos, events, hospital visits to sick kids, and even the characters at Disney’s Star Wars Weekends.

The only problem is that the 501st are very picky about costume details, and I knew that I would have to spend several hundred dollars to finish out my Boba Fett costume. Instead, I decided to sell off the parts and use the money I made to build a new costume. The character I picked was the Sith Acolyte Eradictor from one of the Star Wars video games (that I’ve never played).

Basically, I wanted to carry a lightsaber and wear a mask. And this guy looks awesome. In fact, I think he might be able to take Boba.

Well, after many hours of work, I’ve finally completed my costume, and this afternoon we did a little photo shoot. This evening I submitted my application for the 501st. :)

I made everything except for the mask and the lightsaber. Below, I’ve posted a bunch of photos that I took during the build. As you hover over these images, you should see some notes related to each.

[update 11/2/15: My costume didn’t get 501st approval. Plan on working on an updated set of armor over the next few months.]

Thanks for checking things out! Hopefully I get some good news on my costume approval soon!

If you’re interested in seeing more things like this that I’ve built, check out the category here.

And here’s all the parts bagged up into two large suitcases for the photo shoot:

IMG_5799

Millennium Falcon – for the Kids

IMG_9635.JPG

After a bit of an intervention from my wife a few days ago, I have come to realize that I’m a bit of a project junkie. And especially if that project has to do with cosplay, prop making, Star Wars, or Lord of the Ring, I’m hooked. I mean, really. I have almost zero resistance to such urges.

Though I’m an addict, I find a huge amount of creative joy when working on projects of this sort. So when I decided to use my free time over a week to put together a Millennium Falcon cockpit playhouse for my children, I had a blast. And if my son sleeping inside of it whenever he gets a chance is any indication of how much he likes it, then I think it was well worth the effort.

Someone also recently showed me an inexpensive way to tie audio to multiple buttons, so that’s probably an addition that’s happening in the near future as well. How fun!

IMG_9637.JPG

IMG_5239

FullSizeRender

IMG_5012

IMG_5013 

IMG_5016

For a full writeup of the instructions I made and photos I took while putting the thing together, go here.

In addition, this project has been featured in several blogs, including:

comicbook-com

instructables

make

nerd-approved

technobob

Boba Fett Scratchbuilt Jetpack

It’s been a couple of years since I built my Boba Fett suit, but over the last few weeks I’ve been working on a jetpack. There’s a reason that I put this part off – it’s an incredibly difficult part to build from scratch. But since the unpainted resin kit costs $350, I chose to make the pack out of sintra and upholstery tubing which I managed to pick up for free. Other than that, it was just the cost of Bondo, spray paint, some wooden balls, liquid mask, and a few wooden dowels.

This was my first time to do something so elaborate, but I’m very pleased with the results.

IMG_4822

IMG_4830

For a full writeup, see my full list of instructions on Instructables.

This project has been featured on:

instructables laughing-squidfashionably-geekmakeadafruittechnobob

Star Wars Costumes

For photos of the work in progress, go here.

Boba Fett Costume Build

As I mentioned the other day, I’ve been building a Boba Fett costume for Halloween. It began with my wife’s innocent comment that it would be fun to dress up as Star Wars characters as a family, and when the costume I bought online didn’t live up to my expectations, I began to research how I might build my own costume. Fortunately, there’s a ton of great tips online, and I quickly found myself totally hooked. I love a good project, and without a doubt, this has been the best project I’ve ever attempted.

DSC_0512

Below are photos of my costume through the process. I’ll continue to update this post as I add new components.

Rather than just serving as an example of my compulsiveness, I hope that others attempting to build a Boba Fett costume might find some ideas here and avoid some problems I encountered.

Pics of completed costume here.